USB Port connect to a USB-enabled device.

SIM/SAM Card:

• Open the battery cover underneath the terminal;
• Take out the battery;
• Insert SAM/SIM card into the corresponding SAM/SIM card slot.

microSD card:

• Open the battery cover on the Top of the terminal;
• Take out battery;
• Insert microSD card into the corresponding microSD card slot.

Power On/Off

Power On: press and hold the Power button for 3 seconds until the display lights on.
Power Off: press and hold the Power button for 3 seconds until the display lights off.

Contactless Transactions

Tap a contactless enabled card above the top of the terminal where the contactless sensor is located.

Magnetic Stripe Transactions

With the card's magnetic stripe facing downwards, swipe the card through the magnetic reader at a constant speed, in either direction.

Paper Receipts

Tear off the receipt in a 45 degree angle to the paper cutter.

Battery Charging

With a charging cable connected, the device's charging status shows on the display. Connecting USB port with external adapter can charge the battery.

• Working Environment:
• • Temperature: -10~50°C (14°F ~ 122°F Non-Charging)
  • Humidity: 5%~95% (non-condense)

• Storage Environment:
• • Temperature: -20°C ~70°C(4'F ~158°F Non-Charging)
  • Humidity: 5%~95% (non-condense)

• Avoid placing this product in direct sunlight for extended periods, nor in environments with excessively high temperature, moisture or dust.
• Only qualified personnel should repair this product.
• Before using cards in the chip reader, please ensure it is free from any foreign objects.
• Please use the original adapter, if you need to charge.

WARNING:

• Do not use the battery in direct sunlight or smoky and dusty environments.
• Do not strike, squeeze or step on the battery, nor throw it into liquid or fire.
• If the battery is deformed or damaged, replace immediately.
• Any product warranty is only valid if batteries supplied by PAX Technology Limited are used.
• Charging time should not exceed 24 hours. Over-charging or over-discharging may damage the battery.
• If the product is not being used for an extended period, whether in storage or otherwise, make sure to recharge the battery at least every 6 months.
• Тhe best-practice is to replace batteries every 2 years.
• Dispose of batteries in a responsible manner.

Trademark notice:

“microSD logo is a trademark of SD-3C LLC.”